MAX820TCSE+T Overview
This power management consists of 16 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of 16-SOIC (0.154, 3.90mm Width) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 3V volt supply. When 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. 16 pins are present in total in this power management. It is recommended that Vsup should not be less than 2.75V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be 0°C~70°C TA. Power management has an output of Push-Pull, Push-Pull during operation. The supervisor's supply current is specified to 150μA. For similar manage ics search of the manufacturer, you can always refer to MAX820, the base PMIC number. A power supply of 3/5V watts is required for the operation of this power management. The maximum supply temperature is 150μA.
MAX820TCSE+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.75V
150μA operating supply current
MAX820TCSE+T Applications
There are a lot of Maxim Integrated MAX820TCSE+T Voltage Supervisors applications.
- Smart meter
- Unattended substation automation
- Important electronics for automotive safety
- Solar power charger
- Radar
- Leakage current detection
- Network equipment
- Utility meter
- External alarm
- Electrical fire monitoring system
