TL7705AIDR Overview
There are 8 terminals on this power management that allow it to be mounted. There is a Cut Tape (CT)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 5V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 8 pins on IC management. Power managment ic pin count is 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 3.5V. The maximum supply voltage (Vsup) in this PMIC should not exceed 18V volts. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Complementary. There is a 1.8mA supply current present in the power management. You can always use TL7705, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature that PMIC chip can work with is 3mA.
TL7705AIDR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.5V
1.8mA operating supply current
TL7705AIDR Applications
There are a lot of Texas Instruments TL7705AIDR Voltage Supervisors applications.
- External alarm
- Embedded computing
- Power distribution systems of infant care room
- Automotive permanent magnet synchronous motors
- Household appliances
- Rechargeable batteries
- Military electronics
- Electric heating appliances
- Satellite navigation
- Power distribution systems of operating room
