MAX819MCSA+T Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 1 channels. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. According to the specification, the package's peak reflow temperature is specified to be 260. The supervisor is always powered by a 4.5V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. Using Surface Mount, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. 8 pins are present in total in this power management. There are 8 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 0V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: 0°C~70°C TA. The supervisor's supply current is specified to 11μA. You can always use MAX819, the base supervisor number, to search for similar PMICs of the manufacturer. To operate this power management, you will need at least 5V volts of power.
MAX819MCSA+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
11μA operating supply current
MAX819MCSA+T Applications
There are a lot of Maxim Integrated MAX819MCSA+T Voltage Supervisors applications.
- External alarm
- Personal computers
- Smart meter
- Computer applications
- Multi-voltage system
- emergency room
- Power distribution systems of ICU
- Smartphones
- Detection of phase sequence
- DVR
