5962-9071102MEA Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. A Tube package is used to package the power management. As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes 16-CDIP (0.300, 7.62mm) functions for your convenience. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 240 for the package during reflow. The supervisor is always powered by a 5V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. Through Hole mounts power management on the wall. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 16 pins on IC management. 16 pins are on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 4.5V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. A Through Hole mounting type is recommended. You should set the supervisor's temperature during -55°C~125°C TA . During normal operation, this power managment ic can generate Push-Pull, Push-Pull of output voltage. There is a 10mA supply current present in the power management. It requires 5V watts of power to operate this voltage supervisor. A maximum supply temperature of 10mA can be used with this power management.
5962-9071102MEA Features
Battery Backup Circuit type
Minimum supply voltage of 4.5V
10mA operating supply current
5962-9071102MEA Applications
There are a lot of Maxim Integrated 5962-9071102MEA Voltage Supervisors applications.
- Electronics installed in the vehicle
- WiFi router
- emergency room
- Detection of phase sequence
- Stable power system
- Military electronics
- Personal computers
- Set top box
- Military communications
- Cloud computing
