Name: MAX808NCSA+T
Brand: Maxim Integrated
SKU: MAX808NCSA+T
Price: 5.31000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	0°C~70°C TA
Packaging	Tape & Reel (TR)
Published	2006
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Battery Backup Circuit
Terminal Finish	MATTE TIN
Additional Feature	CMOS RAM WRITE PROTECTION, BATTERY-BACKUP MODE
Subcategory	Power Management Circuits
Max Power Dissipation	471mW
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	MAX808
Pin Count	8
Power Supplies	5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	0V
Operating Supply Current	48μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	4.575V
Number of Voltages Monitored	1
Reset Timeout	140ms Minimum
Supply Current-Max (Isup)	0.09mA
Min Reset Threshold Voltage	4.5V
Max Reset Threshold Voltage	4.65V
Undervoltage Threshold	4.5V
Overvoltage Threshold	4.65V
Length	4.9mm
Width	3.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX808NCSA+T Product Details

MAX808NCSA+T Overview

A total of 8 terminals are used to mount this power management. There is a Tape & Reel (TR)-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. As a reference, this IC power includes 8-SOIC (0.154, 3.90mm Width) functions for your convenience. There are a lot of similarities between this IC power and other Battery Backup Circuit products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 8 pins are located on this power management. This power management has 8 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 0V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during 0°C~70°C TA . There is a 48μA supply current present in the power management. There are also other features in the software such as [0], just to mention a few. To find similar IC managements from the manufacturer, you can always search by MAX808. To operate this power management, you will need at least 5V volts of power.