MAX806RCSA+T Overview
It is mounted through 8 terminals on the power management. In terms of packaging, power management follows the Tape & Reel (TR) model. To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts in a 1-voltage supply. Surface Mount is the one that mounts power management. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 8 pins on the board. It is recommended that Vsup should not be less than 1V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount mounting is recommended. Temperature setting for the supervisors should be 0°C~70°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The power management's supply current is 50μA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. It is always advisable to use MAX806, the base supervisor number, when searching for similar PMICs from the manufacturer. To be able to work, this power management requires 3/5V volts of power.
MAX806RCSA+T Features
Battery Backup Circuit type
Minimum supply voltage of 1V
50μA operating supply current
MAX806RCSA+T Applications
There are a lot of Maxim Integrated MAX806RCSA+T Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Urban rail transit weak current power monitoring
- Dash board
- Leakage current detection
- DC stabilized power supply module
- Data storage applications
- Solar power charger
- Battery cars
- Electronics installed in the vehicle
- Power communication system
