MAX690SCSA+T Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 1 is used to conduct the PMIC chip. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 8 pins on the board. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. A similar IC managements number of the manufacturer can always be found by using MAX690, the base power ics number. It requires 3/5V watts of power to operate this voltage supervisor.
MAX690SCSA+T Features
Battery Backup Circuit type
MAX690SCSA+T Applications
There are a lot of Maxim Integrated MAX690SCSA+T Voltage Supervisors applications.
- Battery cars
- Set top box
- Urban rail transit weak current power monitoring
- Sensitive sensors
- Transformer load monitoring equipment
- Fire equipment power monitoring system
- Detection of phase imbalance
- Electronics installed in the vehicle
- Personal computers
- Embedded computing
