MAX696EPE+ Overview
There are 16 terminals on this power management that allow it to be mounted. Power management is packaged in a Tube way. Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are 16-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. Using Through Hole, IC management is mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 16 pins that are attached to IC management. This power management system has 16 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 3V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. In this case, Through Hole is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Push-Pull. The supervisor's supply current is specified to 300μA. A similar IC managements number of the manufacturer can always be found by using MAX696, the base power ics number. In order to operate this power management, it requires 3.3/5V volts of power. At the most, voltage supervisor can work with a supply temperature of 300μA.
MAX696EPE+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 3V
300μA operating supply current
MAX696EPE+ Applications
There are a lot of Maxim Integrated MAX696EPE+ Voltage Supervisors applications.
- Battery-powered equipment
- Radar
- Power distribution systems of ICU
- Automotive permanent magnet synchronous motors
- Power distribution systems of CCU
- Telecommunications equipment
- Military electronics
- Stable power system
- Utility meter
- Leakage protection
