MC34164P-5RP Overview
It is mounted through 3 terminals on the power management. In terms of packaging, power management follows the Tape & Box (TB) model. The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 1 channels which are available in a series format. For your reference, this PMIC includes a list of TO-226-3, TO-92-3 (TO-226AA) (Formed Leads) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 240 for the package during reflow. The supervisor is always powered by a 2.4V volt supply. Power ics operate at 1 supply voltages. The mount is attached to Through Hole. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. 3 pins are present in total in this power management. 3 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. Through Hole is the recommended mounting type. You should set the supervisor's temperature during 0°C~70°C TA . During operation, this power management system outputs Open Drain or Open Collector. There is a 32μA supply current present in the power management. You can always use MC34164, the base supervisor number, to search for similar PMICs of the manufacturer. There is a requirement for 5V power to power this power management.
MC34164P-5RP Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
32μA operating supply current
MC34164P-5RP Applications
There are a lot of ON Semiconductor MC34164P-5RP Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Precision measurement
- Battery cars
- Digitally controlled LDO regulators circuit
- Embedded computing
- Cloud computing
- Microcontroller system
- Battery cars
- Analog circuit
- Detection of phase sequence
