MAX695EPE+ Overview
Power management is mounted through 16 terminals. In terms of packaging, power management follows the Tube model. To assist you, this IC power includes 1 functions. This power management is made up of 1 channels which are available in a series format. In this PMIC, you can find 16-DIP (0.300, 7.62mm) functions for your reference. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 5V. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by Through Hole. There is a subcategory of this power ic known as Power Management Circuits. A total of 16 pins are located on this power management. 16 pins make up the power management. IC management can only work with a supply voltage of 4.75V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Through Hole mounting is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. There is an output voltage of Push-Pull, Push-Pull from this supervisor when it is operating. There is a supply current of 10mA for the power management. For similar manage ics search of the manufacturer, you can always refer to MAX695, the base PMIC number. This power management requires 5V power to work. A maximum supply temperature of 10mA can be used.
MAX695EPE+ Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
10mA operating supply current
MAX695EPE+ Applications
There are a lot of Maxim Integrated MAX695EPE+ Voltage Supervisors applications.
- Embedded computing
- Important electronics for automotive protection
- WiFi router
- Microcontroller system
- Multi-voltage system
- Important electronics for automotive safety
- Smart meter
- Fire equipment power monitoring system
- Consumer electronics
- Kitchen appliances
