BU4210F-TR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. It is packaged with Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find SC-82 functions for your reference. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. When 2.4V is applied to the power ic, it conducts. IC management conducts in a 1-voltage supply. Power management is included in the Surface Mount mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 4 pins on IC management. There are 82 pins on the supervisor. A voltage (Vsup) that doesn't fall below 900mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 7V volts of supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. Temperature setting for the supervisors should be -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supply current of the power management is 550nA. For similar manage ics search of the manufacturer, you can always refer to BU42*, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.75μA.
BU4210F-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 900mV
550nA operating supply current
BU4210F-TR Applications
There are a lot of ROHM Semiconductor BU4210F-TR Voltage Supervisors applications.
- Personal computers
- Important electronics for automotive safety
- Analog circuit
- DSP
- emergency room
- Power distribution systems of CCU
- Detection of phase imbalance
- Electronics installed in the vehicle
- DC stabilized power supply module
- Embedded computing
