Name: MAX693MJE/883B
Brand: Maxim Integrated
SKU: MAX693MJE/883B
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-CDIP (0.300, 7.62mm)
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	2002
JESD-609 Code	e0
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Type	Battery Backup Circuit
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Power Management Circuits
Max Power Dissipation	600mW
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	245
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Reach Compliance Code	not_compliant
[email protected] Reflow Temperature-Max (s)	NOT SPECIFIED
Output	Push-Pull, Push-Pull
Pin Count	16
Qualification Status	Not Qualified
Power Supplies	5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Operating Supply Current	10mA
Max Supply Current	10mA
Adjustable Threshold	NO
Watchdog Timer	Yes
Reset	Active High/Active Low
Voltage - Threshold	4.4V
Number of Voltages Monitored	1
Reset Timeout	35ms Minimum
Min Reset Threshold Voltage	4.25V
Undervoltage Threshold	4.25V
Overvoltage Threshold	4.5V
Screening Level	MIL-STD-883 Class B
Height Seated (Max)	5.842mm
Width	7.62mm
RoHS Status	Non-RoHS Compliant

MAX693MJE/883B Product Details

MAX693MJE/883B Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. Tube-packaging is used. As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes 16-CDIP (0.300, 7.62mm) functions. There are a lot of similarities between this IC management and other Battery Backup Circuit products. Packages are specified to have an average peak reflow temperature of 245. During operation, the power ic is supplied with a voltage of 5V. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Through Hole. This power ic can be sub-categorized as Power Management Circuits. It has a total of 16 pins that are attached to IC management. There are 16 pins on the power managment ic. A voltage (Vsup) that doesn't fall below 4.5V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Through Hole type of mounting. The temperature of the supervisors should be set to this range: -55°C~125°C TA. While this power management is operating, it will output Push-Pull, Push-Pull as the output voltage. In order to maintain a stable supply current for the power management, 10mA is the recommended value. The power management must be powered by 5V volts to function properly. The maximum supply temperature is 10mA.