MAX6381LT22D4+T Overview
This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of 6-WDFN functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 1.8V is used to conduct the PMIC chip. IC management conducts in a 1-voltage supply. The power management is mounted by a Surface Mount-axis. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 6. The pins of the power management system count 6. IC management can only work with a supply voltage of 1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 7μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6381, which is the base power ics number.
MAX6381LT22D4+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6381LT22D4+T Applications
There are a lot of Maxim Integrated MAX6381LT22D4+T Voltage Supervisors applications.
- Important electronics for automotive safety
- Radar
- Magnetic resonance imaging
- FPGA design
- Battery cars
- Electronics installed in the vehicle
- Detection of phase sequence
- Battery cars
- Power communication system
- Unattended substation automation
