MAX6879ETE+T Overview
As you can see, this power management is mounted through 16 terminals. It is packaged with Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are 2 channels available on this supervisor, and each channel has a different function. For your reference, this PMIC includes a list of 16-WQFN Exposed Pad functions. This IC power shares lots of benefits with other Sequencer products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 3.3V. IC management is possible to find a succession of 2 voltages that have been checked. Power management is included in the Surface Mount mount. The power management system can be categorized as a Power Management Circuits chip. It has a total of 16 pins that are attached to IC management. This power management system has 16 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.7V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. There is a 1.1mA supply current present in the power management. It is always advisable to use MAX6879, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management must be powered by 3/5V volts to function properly.
MAX6879ETE+T Features
Sequencer type
Minimum supply voltage of 2.7V
1.1mA operating supply current
MAX6879ETE+T Applications
There are a lot of Maxim Integrated MAX6879ETE+T Voltage Supervisors applications.
- Radio
- Insulation fault location system
- Satellite navigation
- Power communication system
- Detection of phase imbalance
- Network equipment
- Battery cars
- Telecommunications equipment
- Digitally controlled LDO regulators circuit
- Radar
