TL7702ACP/A Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. A Tube package is used to package the power management. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. IC management is packaged as a 8-DIP (0.300, 7.62mm) package. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. When 5V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. By Through Hole, IC management has been mounted. It has a total of 8 pins that are attached to IC management. 8 pins make up the power management. There should be a minimum voltage supply (Vsup) of 3.6V for this PMIC. The supply voltage (Vsup) should not exceed 18V volts in this IC power. Power management recommends the Through Hole mounting type. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. While in operation, this supervisor has a voltage output of Complementary. In order to maintain a stable supply current for the power management, 3.3mA is the recommended value. It is always advisable to use TL7702, the base supervisor number, when searching for similar PMICs from the manufacturer.
TL7702ACP/A Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.6V
3.3mA operating supply current
TL7702ACP/A Applications
There are a lot of STMicroelectronics TL7702ACP/A Voltage Supervisors applications.
- Stable power system
- Leakage protection
- Radio
- Unattended substation automation
- Sensitive sensors
- DSP
- FPGA design
- Linux and server computing
- Precision measurement
- Smartphones
