MAX6871ETJ+ Overview
It is mounted through 32 terminals on the power management. Tube-packaging is used. Please refer to this PMIC for 1 functions. There are 4 channels available on this supervisor, and each channel has a different function. Please find attached 32-WFQFN Exposed Pad functions for your reference in this IC power. There are a lot of similarities between this IC management and other Sequencer products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 6.5V supply voltage, the power management conducts. Power management conducts at a voltage of 4. The mount is provided by Surface Mount. A total of 32 pins are located on this power management. The pins of the power management system count 32. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 4V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 13.2V volts. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain, Push-Pull. It is estimated that the voltage supervisor's supply current is 1.2mA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6871, which is the base power ics number.
MAX6871ETJ+ Features
Sequencer type
Minimum supply voltage of 4V
1.2mA operating supply current
MAX6871ETJ+ Applications
There are a lot of Maxim Integrated MAX6871ETJ+ Voltage Supervisors applications.
- Radio
- FPGA design
- Solar power charger
- Power distribution systems of infant care room
- emergency room
- Sensitive sensors
- Detection of phase imbalance
- Power distribution systems of CCU
- Dash board
- Fire equipment power monitoring system
