MAX808LESA+T Overview
There are 8 terminals connected to this power management, which makes it easy to mount. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. There are a lot of similarities between this IC management and other Battery Backup Circuit products. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 5V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 8 pins on IC management. There are 8 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 0V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~85°C TA . For this power management, there is an 48μA volt supply current. There are other features such as CMOS RAM WRITE PROTECTION, BATTERY-BACKUP MODE to name a few. It is always advisable to use MAX808, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 5V volts of power in order for this voltage supervisor to operate.
MAX808LESA+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
48μA operating supply current
MAX808LESA+T Applications
There are a lot of Maxim Integrated MAX808LESA+T Voltage Supervisors applications.
- Battery cars
- WiFi router
- Power distribution systems of CCU
- Power communication system
- Consumer electronics
- Network equipment
- Sensitive sensors
- DSP
- Leakage protection
- Fire equipment power monitoring system
