MAX6867UK26D3S+T Overview
A total of 5 terminals are used to mount this power management. A Tape & Reel (TR) package is used to package the power management. For your reference, this IC power includes a list of 1 functions. This power management is made up of 1 channels which are available in a series format. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 2.5V-voltage supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts IC management. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 5. This power management has 5 pins. It is recommended that Vsup should not be less than 1.1V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The power management's supply current is 7μA. You can always use MAX6867, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX6867UK26D3S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6867UK26D3S+T Applications
There are a lot of Maxim Integrated MAX6867UK26D3S+T Voltage Supervisors applications.
- Radio
- Detection of phase sequence
- Satellite navigation
- Battery cars
- Sensitive sensors
- Digitally controlled LDO regulators circuit
- Electric heating appliances
- Unattended substation automation
- Linux and server computing
- Electronics installed in the vehicle
