MAX6716AUTZWD3+T Overview
There are 6 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tape & Reel (TR) model. Please refer to this PMIC for 1 functions. Power management consists of 2 channels, each of which can be used independently. In this PMIC, you can find SOT-23-6 functions for your reference. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. The package peak reflow temperature is specified to be 260. Manage ics operate at 1V supply voltages. IC management is possible to find a succession of 2 voltages that have been checked. The mount is provided by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 6 pins on power management. Power managment ic pin count is 6. Supply voltage (Vsup) should be at least 800mV for this power management. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Mounting type Surface Mount is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~125°C. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 15μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX6716A, the base power ics number. To operate this power management, you will need at least 1/5V volts of power.
MAX6716AUTZWD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6716AUTZWD3+T Applications
There are a lot of Maxim Integrated MAX6716AUTZWD3+T Voltage Supervisors applications.
- Smart meter
- Important electronics for automotive protection
- Radar
- Microcontroller system
- Low voltage/high power - AI, GPU
- Radio
- Military communications
- Solar power charger
- Power distribution systems of ICU
- emergency room
