MAX6866UK24D3L+T Overview
Power management is mounted through 5 terminals. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 2.5V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Surface Mount-axis. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 5. This power management has 5 pins. It is recommended that Vsup should not be less than 1.1V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. The supply current of the power management is 7μA. You can always use MAX6866, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX6866UK24D3L+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6866UK24D3L+T Applications
There are a lot of Maxim Integrated MAX6866UK24D3L+T Voltage Supervisors applications.
- Embedded computing
- Radar
- Detection of phase sequence
- Battery cars
- DSP
- Microprocessor system
- FPGA design
- DVR
- Kitchen appliances
- Telecommunications equipment
