MAX6466UR21+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. A supply voltage of 3.6V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. In total, IC powers are 3 pins on the board. 3 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~125°C TA. During operation, this power management system outputs Open Drain or Open Collector. There is a supply current of 3.5μA for the power management. You can always use MAX6466, the base supervisor number, to search for similar PMICs of the manufacturer. Voltage supervisor can work with a supply temperature of 3.5μA at the most.
MAX6466UR21+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
3.5μA operating supply current
MAX6466UR21+T Applications
There are a lot of Maxim Integrated MAX6466UR21+T Voltage Supervisors applications.
- Utility meter
- Urban rail transit weak current power monitoring
- Power distribution systems of CCU
- Important electronics for automotive protection
- DSP
- Microprocessor system
- Battery cars
- Power communication system
- Dash board
- Household appliances
