MAX6865UK44D2L+T Overview
There are 5 terminals connected to this power management, which makes it easy to mount. A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 1. Using Surface Mount, IC management is mounted. There is a subcategory of this power ic known as Power Management Circuits. The total number of pins on this power management is 5. This power management system has 5 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management recommends the Surface Mount mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. There is a 7μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX6865, the base power ics number.
MAX6865UK44D2L+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK44D2L+T Applications
There are a lot of Maxim Integrated MAX6865UK44D2L+T Voltage Supervisors applications.
- Data storage applications
- Power distribution systems of infant care room
- Consumer electronics
- DSP
- Dash board
- Household appliances
- Set top box
- WiFi router
- Radio
- Detection of phase imbalance
