MAX6304CSA+ Overview
As you can see, this power management is mounted through 8 terminals. Power management is packaged in a Tube way. As a reference, this IC management includes 1 functions for your convenience. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. When a supply voltage of 5V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 8. This power management system has 8 pins. IC management can only work with a supply voltage of 1.31V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The supply current of the power management is 4μA. There are also other features in the software such as [0], just to mention a few. For similar manage ics search of the manufacturer, you can always refer to MAX6304, the base PMIC number.
MAX6304CSA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.31V
4μA operating supply current
MAX6304CSA+ Applications
There are a lot of Maxim Integrated MAX6304CSA+ Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Automotive permanent magnet synchronous motors
- Power distribution systems of CCU
- Electronics installed in the vehicle
- Microprocessor system
- Network equipment
- Power distribution systems of infant care room
- Rechargeable batteries
- Battery cars
- FPGA design
