MAX6865UK43D3S+T Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. A Tape & Reel (TR) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes SC-74A, SOT-753 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 2.5V supply voltages. IC management conducts in a 1-voltage supply. The mount is attached to Surface Mount. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 5 pins on the board. There are 5 pins on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a supply current of 7μA for the power management. It is always advisable to use MAX6865, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6865UK43D3S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK43D3S+T Applications
There are a lot of Maxim Integrated MAX6865UK43D3S+T Voltage Supervisors applications.
- Telecommunications equipment
- Power distribution systems of ICU
- Cloud computing
- External alarm
- Medical-specific isolation transformer
- Leakage protection
- Battery-powered equipment
- Radio
- Military electronics
- Power distribution systems of operating room
