MAX6865UK35D1L+T Overview
A total of 5 terminals are used to mount this power management. Tape & Reel (TR)-packaging is used. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. IC management is packaged as a SC-74A, SOT-753 package. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 2.5V supply voltage, the power management conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, it has 5 pins on IC management. Pin count of the power management is 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. Supplied with a operating current of 7μA, this PMIC is capable of fully function as specified. It is always advisable to use MAX6865, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6865UK35D1L+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK35D1L+T Applications
There are a lot of Maxim Integrated MAX6865UK35D1L+T Voltage Supervisors applications.
- Network equipment
- Battery cars
- Microprocessor system
- Functional modules
- Radio
- DC stabilized power supply module
- Solar power charger
- Medical-specific insulation monitor
- DVR
- Electrical fire monitoring system
