MAX6865UK31D4L+T Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. It is packaged with Tape & Reel (TR). To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 2.5V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 5. Power managment ic pin count is 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.1V, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. The supervisor's supply current is specified to 7μA. For similar manage ics search of the manufacturer, you can always refer to MAX6865, the base PMIC number.
MAX6865UK31D4L+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK31D4L+T Applications
There are a lot of Maxim Integrated MAX6865UK31D4L+T Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- WiFi router
- Personal computers
- Electronics installed in the vehicle
- Low voltage/high power - AI, GPU
- Radio
- Cloud computing
- Battery cars
- emergency room
- Automotive permanent magnet synchronous motors
