Name: ADM693AN
Brand: Hotenda
SKU: ADM693AN
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Type	Battery Backup Circuit
Additional Feature	RESET CONTROL
Subcategory	Power Management Circuits
Max Power Dissipation	600mW
Technology	CMOS
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	ADM693
Output	Open Drain, Push-Pull
Pin Count	16
Power Supplies	5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Operating Supply Current	100μA
Nominal Supply Current	1.95mA
Power Dissipation	600mW
Max Supply Current	1.95mA
Adjustable Threshold	NO
Watchdog Timer	Yes
Reset	Active High/Active Low
Voltage - Threshold	4.4V
Reset Timeout	35ms Minimum
Min Reset Threshold Voltage	4.25V
Max Reset Threshold Voltage	4.48V
Undervoltage Threshold	4.25V
Overvoltage Threshold	4.48V
Number of Monitored Inputs	1
Reset Delay Time	70 ms
Height Seated (Max)	5.33mm
Width	7.62mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADM693AN Product Details

ADM693AN Overview

This power management consists of 16 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Tube model. In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes 16-DIP (0.300, 7.62mm) functions for your convenience. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. When 5V is applied to the power ic, it conducts. By Through Hole, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 16 pins that are attached to IC management. The pins of the power management system count 16. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 4.5V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Mounting type Through Hole is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain, Push-Pull. It is estimated that the voltage supervisor's supply current is 100μA. As well as this, there are other features to mention such as [0], for example. To find similar IC managements from the manufacturer, you can always search by ADM693. A power supply of 5V watts is required for the operation of this power management. The maximum supply temperature is 1.95mA. On the power management, 1 inputs are monitored.