MAX6865UK30D6L+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. The package peak reflow temperature is specified to be 260. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. This power ic can be sub-categorized as Power Management Circuits. There are a total of 5 pins on power management. Power managment ic pin count is 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.1V, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The supply current of the power management is 7μA. You can always use MAX6865, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX6865UK30D6L+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK30D6L+T Applications
There are a lot of Maxim Integrated MAX6865UK30D6L+T Voltage Supervisors applications.
- Display equipment
- Solar power charger
- Detection of phase loss
- Important electronics for automotive protection
- Efficient information transmission
- Microcontroller system
- Radar
- Detection of phase sequence
- Urban rail transit weak current power monitoring
- Leakage protection
