MAX6865UK26D3L+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Tape & Reel (TR)-packaging is used. For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 1 channels. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. When 2.5V is applied to the power ic, it conducts. Power ics operate at 1 supply voltages. The mount is provided by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. In total, it has 5 pins on IC management. There are 5 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supply current of the power management is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6865, the base power ics number.
MAX6865UK26D3L+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK26D3L+T Applications
There are a lot of Maxim Integrated MAX6865UK26D3L+T Voltage Supervisors applications.
- DC stabilized power supply module
- Kitchen appliances
- Stable power system
- Microcontroller system
- Consumer electronics
- DSP
- Urban rail transit weak current power monitoring
- Digitally controlled LDO regulators circuit
- Battery-powered equipment
- Magnetic resonance imaging
