MAX6865UK17D6S+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Tape & Reel (TR)-packaging is used. Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. Please refer to power management for SC-74A, SOT-753 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 2.5V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by a Surface Mount-axis. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 5 pins in it. Power managment ic pin count is 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. The supervisor's supply current is specified to 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6865, the base power ics number.
MAX6865UK17D6S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK17D6S+T Applications
There are a lot of Maxim Integrated MAX6865UK17D6S+T Voltage Supervisors applications.
- Smart meter
- Detection of phase sequence
- Battery-powered equipment
- Power communication system
- Radio
- Power distribution systems of infant care room
- Electric heating appliances
- Efficient information transmission
- DC stabilized power supply module
- Smartphones
