MAX6861UK29+T Overview
There are 5 terminals on this power management that allow it to be mounted. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. The package peak reflow temperature is specified to be 260. When 2.5V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. There is a subcategory called Power Management Circuits for this power management. Power management has a total of 5 pins. Pin count of the power management is 5. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The supervisor's supply current is specified to 7μA. For similar manage ics search of the manufacturer, you can always refer to MAX6861, the base PMIC number.
MAX6861UK29+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6861UK29+T Applications
There are a lot of Maxim Integrated MAX6861UK29+T Voltage Supervisors applications.
- emergency room
- DSP
- Digitally controlled LDO regulators circuit
- Insulation fault location system
- Smart meter
- Detection of phase loss
- Battery cars
- Power distribution systems of ICU
- Precision measurement
- Embedded computing
