MAX6861UK17+T Overview
This power management consists of 5 mounting terminals on which it can be mounted. A Strip package is used to package the power management. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find SOT-23 functions for you to refer to. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. The supervisor is always powered by a 2.5V volt supply. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, it has 5 pins on IC management. There are 5 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. As far as the supply current of the power management is concerned, it is 7μA.
MAX6861UK17+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6861UK17+T Applications
There are a lot of Maxim Integrated MAX6861UK17+T Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Set top box
- Household appliances
- Microcontroller system
- Analog circuit
- Embedded computing
- WiFi router
- Power distribution systems of operating room
- Kitchen appliances
- Rechargeable batteries
