MAX6386XS46D1+T Overview
This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. Packaged in the form of a Tape & Reel (TR), power management is easy to use. As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 1 channels. The purpose of this IC power is to provide you with a reference of SC-82A, SOT-343 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 1.8V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts power management on the wall. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 4 pins on power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The power management's supply current is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6386, the base power ics number.
MAX6386XS46D1+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6386XS46D1+T Applications
There are a lot of Maxim Integrated MAX6386XS46D1+T Voltage Supervisors applications.
- Set top box
- WiFi router
- Telecommunications equipment
- Efficient information transmission
- Dash board
- Computer applications
- Precision measurement
- Leakage current detection
- Multi-voltage system
- Power distribution systems of ICU
