MAX6860UK16D3+T Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Power management is packaged in a Tape & Reel (TR) way. Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 2.5V is applied to the power ic, it conducts. IC management conducts in a 1-voltage supply. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 5 pins that are attached to IC management. This power management system has 5 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. For this power management, there is an 7μA volt supply current. It is always advisable to use MAX6860, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6860UK16D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6860UK16D3+T Applications
There are a lot of Maxim Integrated MAX6860UK16D3+T Voltage Supervisors applications.
- Electronics installed in the vehicle
- Embedded computing
- Power distribution systems of infant care room
- Consumer electronics
- Cloud computing
- Radio
- Automotive power systems
- DVR
- Microprocessor system
- Personal computers
