MAX6856UK30D3+T Overview
This power management consists of 5 mounting terminals on which it can be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. As a reference, this IC management includes 1 functions for your convenience. On this supervisor, there is a series of 1 channels that can be found. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 5. There are 5 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type for IC management is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. There is a supply current of 7μA for the power management. You can always use MAX6856, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX6856UK30D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6856UK30D3+T Applications
There are a lot of Maxim Integrated MAX6856UK30D3+T Voltage Supervisors applications.
- External alarm
- Computer applications
- Consumer electronics
- Dash board
- Power distribution systems of operating room
- Leakage protection
- Medical-specific isolation transformer
- Rechargeable batteries
- Detection of phase sequence
- Personal computers
