LM809M3X-3.08 Overview
There are 3 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be 260. When 3.3V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. The power management system can be categorized as a Power Management Circuits chip. The total number of pins on this power management is 3. 3 pins are present on the power management system. It is recommended that Vsup should not be less than 1V for this IC power. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~105°C TA . There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a 15μA supply current present in the power management. For similar manage ics search of the manufacturer, you can always refer to LM809, the base PMIC number.
LM809M3X-3.08 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
LM809M3X-3.08 Applications
There are a lot of Texas Instruments LM809M3X-3.08 Voltage Supervisors applications.
- Military electronics
- Multi-voltage system
- Power communication system
- Leakage current detection
- Set top box
- Stable power system
- Low voltage/high power - AI, GPU
- Electronics installed in the vehicle
- Analog circuit
- Microcontroller system
