MAX6855UK28D6+T Overview
This power management consists of 5 mounting terminals on which it can be mounted. A Tape & Reel (TR) package is used to package the power management. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. The supervisor is always powered by a 2.5V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 5 pins. Power managment ic pin count is 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. There is a 7μA supply current present in the power management. It is always advisable to use MAX6855, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6855UK28D6+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6855UK28D6+T Applications
There are a lot of Maxim Integrated MAX6855UK28D6+T Voltage Supervisors applications.
- Power distribution systems of ICU
- Refrigeration
- Satellite navigation
- Kitchen appliances
- Leakage current detection
- Analog circuit
- Power distribution systems of operating room
- Dash board
- Transformer load monitoring equipment
- Microprocessor system
