MAX6324CUT23+T Overview
Power management is mounted through 6 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of SOT-23-6 functions. This IC power shares lots of benefits with other Watchdog Circuit products. According to the specification, the package's peak reflow temperature is specified to be 260. The supervisor is always powered by a 3V volt supply. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. A total of 6 pins are located on this power management. Pin count of the power management is 6. There should be a minimum voltage supply (Vsup) of 1.2V for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. The supply current of the power management is 27μA. To find similar IC managements from the manufacturer, you can always search by MAX6324.
MAX6324CUT23+T Features
Watchdog Circuit type
Minimum supply voltage of 1.2V
27μA operating supply current
MAX6324CUT23+T Applications
There are a lot of Maxim Integrated MAX6324CUT23+T Voltage Supervisors applications.
- Medical-specific isolation transformer
- Precision measurement
- Insulation fault location system
- Personal computers
- Cloud computing
- Leakage protection
- DSP
- Important electronics for automotive protection
- Detection of phase sequence
- Set top box
