MAX6855UK25D3+T Overview
A total of 5 terminals are used to mount this power management. In terms of packaging, power management follows the Tape & Reel (TR) model. In this PMIC, you can find 1 functions for your reference. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. When 2.5V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. In total, IC powers are 5 pins on the board. This power management has 5 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The power management's supply current is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6855, the base power ics number.
MAX6855UK25D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6855UK25D3+T Applications
There are a lot of Maxim Integrated MAX6855UK25D3+T Voltage Supervisors applications.
- Multi-voltage system
- Transformer load monitoring equipment
- Network equipment
- Power distribution systems of operating room
- Leakage current detection
- Magnetic resonance imaging
- FPGA design
- Battery-powered equipment
- Low voltage/high power - AI, GPU
- Rechargeable batteries
