MAX16016LTBY+T Overview
There are 10 terminals on this power management that allow it to be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find 10-WFDFN Exposed Pad functions for you to refer to. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be NOT SPECIFIED. There is a voltage supply of 1.62V for the PMIC chip, and the chip conducts at that voltage. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. Power management has a total of 10 pins. There are 10 pins on the supervisor. IC management can only work with a supply voltage of 0V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -40°C~85°C degrees. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. To find similar IC managements from the manufacturer, you can always search by MAX16016.
MAX16016LTBY+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 0V
MAX16016LTBY+T Applications
There are a lot of Maxim Integrated MAX16016LTBY+T Voltage Supervisors applications.
- Insulation fault location system
- Battery-powered equipment
- Radio
- Personal computers
- Electrical fire monitoring system
- Important electronics for automotive protection
- Set top box
- emergency room
- Computer applications
- Smartphones
