MAX6855UK21D5+T Overview
It is mounted through 5 terminals on the power management. There is a Tape & Reel (TR)-packaging method applied to IC management. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. According to the specification, the package's peak reflow temperature is specified to be 260. When a supply voltage of 2.5V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. The mount is provided by Surface Mount. There is a subcategory called Power Management Circuits for this power management. A total of 5 pins are located on this power management. This power management has 5 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 7μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6855, which is the base power ics number.
MAX6855UK21D5+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6855UK21D5+T Applications
There are a lot of Maxim Integrated MAX6855UK21D5+T Voltage Supervisors applications.
- Insulation fault location system
- Digitally controlled LDO regulators circuit
- Utility meter
- Electronics installed in the vehicle
- Dash board
- Leakage protection
- Smart meter
- Microprocessor system
- Power distribution systems of operating room
- Electrical fire monitoring system
