MAX16033PLB26+T Overview
A total of 10 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. IC management is packaged as a 10-WFDFN package. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. IC management is specified that the package peak reflow temperature should be 260. Power management conducts at a voltage of 1. The power management is mounted by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 10 pins that are attached to IC management. This power management has 10 pins. It is recommended that Vsup should not be less than 0V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C. Power management has an output of Open Drain or Open Collector during operation. Supplied with a operating current of 22μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using MAX16033, the base power ics number. It requires 2.5/5V watts of power to operate this voltage supervisor.
MAX16033PLB26+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
22μA operating supply current
MAX16033PLB26+T Applications
There are a lot of Maxim Integrated MAX16033PLB26+T Voltage Supervisors applications.
- Important electronics for automotive protection
- Transformer load monitoring equipment
- Detection of phase loss
- Radar
- Functional modules
- Embedded computing
- Leakage current detection
- Power distribution systems of ICU
- Solar power charger
- Detection of phase sequence
