MAX6855UK20D6+T Overview
There are 5 terminals connected to this power management, which makes it easy to mount. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Packages are specified to have an average peak reflow temperature of 260. IC management conducts at a voltage of 2.5V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 5. Power managment ic pin count is 5. Supply voltage (Vsup) should be at least 1.1V for this power management. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type for IC management is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. There is a supply current of 7μA for the power management. For similar manage ics search of the manufacturer, you can always refer to MAX6855, the base PMIC number.
MAX6855UK20D6+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6855UK20D6+T Applications
There are a lot of Maxim Integrated MAX6855UK20D6+T Voltage Supervisors applications.
- Utility meter
- emergency room
- Cloud computing
- Solar power charger
- Fire equipment power monitoring system
- Consumer electronics
- Power distribution systems of operating room
- Dash board
- Leakage current detection
- Smart meter
