MAX6865UK16D5L+T Overview
It is mounted through 5 terminals on the power management. Power management is packaged in a Tape & Reel (TR) way. In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. When 2.5V is applied to the power ic, it conducts. IC management conducts in a 1-voltage supply. Surface Mount is the one that mounts power management. There is a subcategory called Power Management Circuits for this power management. In total, it has 5 pins on IC management. The pins of the power management system count 5. There should be a minimum voltage supply (Vsup) of 1.1V for this PMIC. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount mounting is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. During operation, this power management system outputs Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 7μA. It is always advisable to use MAX6865, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6865UK16D5L+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK16D5L+T Applications
There are a lot of Maxim Integrated MAX6865UK16D5L+T Voltage Supervisors applications.
- Automotive power systems
- Microprocessor system
- Important electronics for automotive safety
- DSP
- Detection of phase imbalance
- Radar
- Power distribution systems of CCU
- Power distribution systems of operating room
- Leakage protection
- Electronics installed in the vehicle
