MAX6855UK16D3+T Overview
There are 5 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 1 channels which are available in a series format. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. The supervisor is always powered by a 2.5V volt supply. Power management conducts at a voltage of 1. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 5 pins that are attached to IC management. There are 5 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The supply current of the power management is 7μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6855, which is the base power ics number.
MAX6855UK16D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6855UK16D3+T Applications
There are a lot of Maxim Integrated MAX6855UK16D3+T Voltage Supervisors applications.
- Analog circuit
- Detection of phase sequence
- Smartphones
- Battery-powered equipment
- Power distribution systems of ICU
- Dash board
- DVR
- Radio
- Medical-specific isolation transformer
- Power distribution systems of operating room
