MAX6716AUTWGD3+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. It is packaged with Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are 2 channels on this power managment ic that can be found in a series. There are SOT-23-6 functions included in this PMIC so that you can refer to them. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 1V. IC management is possible to find a succession of 2 voltages that have been checked. Power management is included in the Surface Mount mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 6 pins on IC management. 6 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C. During operation, this power management system outputs Push-Pull, Totem Pole. For this power management, there is an 15μA volt supply current. To find similar IC managements from the manufacturer, you can always search by MAX6716A. The power management must be powered by 1/5V volts to function properly.
MAX6716AUTWGD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6716AUTWGD3+T Applications
There are a lot of Maxim Integrated MAX6716AUTWGD3+T Voltage Supervisors applications.
- Efficient information transmission
- Personal computers
- Linux and server computing
- Telecommunications equipment
- Medical-specific isolation transformer
- Display equipment
- Electrical fire monitoring system
- Medical-specific insulation monitor
- Dash board
- Sensitive sensors
