MAX6848KARD3+T Overview
The SOT-23 package is suitable for battery instrument. A system battery like this uses an analog IC named POWER SUPPLY SUPPORT CIRCUIT. We have 1 channels available. 8 pins are attached to it. It is recommended that you mount this electrical component using Surface Mount. The voltage supply for this electric component should not be less than 1.6V volts. It is recommended that the power management IC's supply voltage is 5.5V higher than 5.5V volts. In order for this system battery to be activated, its value cannot be less than 0. A temperature below 85°C is recommended for its use. You should leave this transceiver ic set to 3.6V at all times. The power IC has a total of 8 pins. Battery protection ICs should have a minimum reset threshold voltage under 630mV. A minimum reset threshold voltage of 600mV should be exceeded by the power management IC. (Isup) must have a maximum current of 0.007mA.
MAX6848KARD3+T Features
Available in SOT-23 Package
with 8 Pins
operate supply voltage at the range of 3.6V
The Min Reset Threshold Voltage at 600mV
MAX6848KARD3+T Applications
There are a lot of Maxim Integrated
MAX6848KARD3+T Battery Management ICs applications.
- A/C power substations
- Internet infrastructure equipment
- Aviation ground support systems
- Tower communications
- Weather stations
- Distributed energy resources
- Solar and wind-generating plants
- Electric street sweepers
- Shuttle robots
- Robots
