MAX6834HXRD3+T Overview
It is mounted through 3 terminals on the power management. A Tape & Reel (TR) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. In this PMIC, you can find SC-70, SOT-323 functions for your reference. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. In a 1.2V supply voltage, the power management conducts. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. This power ic can be sub-categorized as Power Management Circuits. There are a total of 3 pins on power management. 3 pins make up the power management. A voltage (Vsup) that doesn't fall below 550mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 3.6V volts. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. There is a 16μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX6834, the base power ics number.
MAX6834HXRD3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 550mV
16μA operating supply current
MAX6834HXRD3+T Applications
There are a lot of Maxim Integrated MAX6834HXRD3+T Voltage Supervisors applications.
- External alarm
- Important electronics for automotive protection
- Electronics installed in the vehicle
- FPGA design
- DVR
- Radio
- Important electronics for automotive safety
- Smart meter
- Military electronics
- Power distribution systems of CCU
