MAX6319LHUK46C-T Overview
This power management consists of 5 mounting terminals on which it can be mounted. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Packages are specified to have an average peak reflow temperature of 245. When a supply voltage of 3V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. A total of 5 pins are located on this power management. 5 pins make up the power management. Supply voltage (Vsup) should be at least 1V for this power management. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~125°C TA degrees. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 3μA. You can always use MAX6319, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX6319LHUK46C-T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
3μA operating supply current
MAX6319LHUK46C-T Applications
There are a lot of Maxim Integrated MAX6319LHUK46C-T Voltage Supervisors applications.
- Efficient information transmission
- Insulation fault location system
- DSP
- Important electronics for automotive protection
- Detection of phase loss
- Detection of phase sequence
- Power distribution systems of CCU
- Transformer load monitoring equipment
- External alarm
- DVR
