MAX6795TPSD2+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 20 in total. This power ic is packaged in a way that looks like a Tape & Reel (TR). To assist you, this IC power includes 1 functions. It is possible to find on this power management a series of 1 channels. For your reference, this PMIC includes a list of 20-WQFN Exposed Pad functions. There are a lot of similarities between this IC power and other Regulator/Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 14V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts power management on the wall. There is a subcategory called Automotive Circuits for this power management. There are a total of 20 pins on power management. 20 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 5V. During this IC power, the maximum supply voltage (Vsup) should not exceed 72V volts. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. In addition, IC management are other features such as [0], to mention only a few. To find similar IC managements from the manufacturer, you can always search by MAX6795.
MAX6795TPSD2+T Features
Regulator/Supervisor type
Minimum supply voltage of 5V
MAX6795TPSD2+T Applications
There are a lot of Maxim Integrated MAX6795TPSD2+T Voltage Supervisors applications.
- Fire equipment power monitoring system
- emergency room
- Battery-powered equipment
- Kitchen appliances
- Analog circuit
- FPGA design
- Insulation fault location system
- Functional modules
- Data storage applications
- Military electronics
